Green Tea steamer

Feature: It consists of steamer ,dewatering system and steam thermal furnace. the high-temperature steam hot air continuously contact with tea leaf ,destroy the enzyme activity inside. can continuously complete the entire process of steaming and dewatering of fresh leaf. To  keep complete leaf  and original color.
Model  JY-6CZGS150 
Steaming unit  dimension(L*W*H) 326*90*152cm
Cooling  unit  dimension(L*W*H) 500*93*110cm
Output per hour 100-150kg/h
Motor power 10kW
Steaming unit Mesh belt width(cm)  65cm
Steaming unit Mesh belt speed(m/min) 2.5~4.0
Cooling unit Mesh belt width(cm)  65cm
Cooling  unit Mesh belt speed(m/min) 0.94~9.43
Water loss rate 35%
Hot air bag temperature  120~150
Steaming temperature(Celsius) 110~150
Feature: The steaming machine is mainly composed of the following parts. 1 Steam air chamber: The steam generated by the boiler is first sent into the steam chamber by the steam distribution pipe, and then collected into the ejection outlet, and the steam is ejected to the steaming chamber. 2. Steaming leaf chamber: The fresh leaves put into the feed inlet get steam ejected from the steam chamber, so that the fresh leaves undergo the steaming process until they reach the steaming process standard. 3. Metal mesh cylinder: The above steam chamber and steaming chamber are fixed, while the metal mesh cylinder is running, fresh leaves are continuously fed and steam from the steaming chamber is obtained during constant stirring, and steamed to achieve steaming. After the request, they were continuously eliminated. 4. Stirring shaft: The function is to effectively stir the steamed green leaves in the metal mesh cylinder to ensure that the supply of the leaves is not hindered. The steamed leaves are sent out in the order of first-in, first-out, and last-in. 5 .Regulating door: The steaming chamber and the net tube are filled with steam. When it is judged that the degree of steaming heat is excessive or insufficient, the regulating door can be opened and closed appropriately to adjust the steam release or not to ensure the steam of the leaves. 6 .Drive unit: It consists of electric motor, reduction gear, stepless speed change mechanism, etc. The metal mesh cylinder and the stirring shaft rotate at a given speed and a certain transmission ratio. 7. Tilt device: The steam chamber, steaming chamber, and net cylinder are collectively called steaming cylinders. According to the steaming conditions of the steaming leaves, the tilting angle of the steaming cylinders can be adjusted to control the steaming time. 8 .Electric control box: This electric control box starts and stops the host, feeder, and conveyor motor. 9 .Frame: Supporting parts such as steamer, drive, stirring shaft, feeder, etc. 10. Feeding device: Installed on the feeding port, fresh leaves are put into the feeding hopper, and they are loosened by the screw type feeder into the main body of the steaming machine for steaming. 11. Leaf feeder: This auxiliary machine is an inclined scraper belt conveyor for fresh leaf supply and transmission. Specification:
Model  JY-6CZG600L
Machine dimension(L*W*H) 550*100*200cm
Output per hour 300kg/h
Motor power 3.0kW
Cylinder diameter x length (cm) 30*142
Cylinder speed (r/min) 22-48
conveyor Power(kW) 0.55
Feeder Power(kW) 0.55
Machine weight 1000kg
Green tea steaming: Selection of (original leaves): The original leaves used for steamed tea are more strict than ordinary green tea. The principle is to select fresh and young ones. The fresh leaves picked on the same day should be manufactured on the same day. First, steamed cyanine 1. The purpose of steamed cyanine: use steaming heat to stop the activity of oxidizing enzyme in a short time to maintain the unique aroma of green tea. 2. Use of machinery: feeding belt steamer (cyanine steaming) or rotary type (stirring steaming). 3. The method of steaming cyanine: attention should be paid to the performance of the steamer used. The tea cyanine passes through the steaming chamber to adjust the speed properly. At the same time, the nature of the original leaves, that is, the old and tender tea leaves, when passing through the steaming chamber, the speed must be processed slowly, generally the standard of the belt steamer The input amount is 140 grams per square foot, and the temperature is 100. C time 30-40 end, after passing through the steaming chamber, the steaming leaves are cooled rapidly and sent into rough rolling.

Packaging

Professional export standard packaging.wooden pallets, wooden boxes with fumigation inspection. It is reliable to ensure the safety during transportation.

Product Certificate

Certificate of Origin, COC Inspect certificate, ISO quality certificate, CE related certificates.

Our Factory

Professional tea industry machinery manufacturer with more than 20 years of manufacturing experience, using high-quality accessories, sufficient accessories supply.

Visit & Exhibition