One hand tea harvester Model :NTJ260
1.Advantage: 1. The weight of cutter much lighter.Tea plucking is easier. 2. Use Japan SK51 Blade.Sharper, better tea quality. 3. Increase the speed ratio of gear ,does not affect the secondary growth of the tea, 4. The vibration is smaller. 5.with lowest noise ,Reduce the impact of noise decibels on the body of tea farmers. 6.The gear box is made of high-strength aluminum,has good heat dissipation performance, is not easy to deform, and is not easy to break, and has higher safety. 7.Convenient maintenance: each part is formed independently, where there is a problem, where to disassemble and replace, avoiding the trouble of dismantling the broken part of the machine. . 8. Connecting rod suspension design: The patented connecting rod suspension technology is used to eliminate the problem of broken gearbox caused by the blade head and the connecting rod falling off. 9.grease overflow prevention design: The blade buckle is added to effectively prevent the grease of the gear box from overflowing with the friction of the blade, thereby avoiding the failure of the gear connecting rod due to the lack of grease. 2. Specification:|
No. |
item |
specification |
|
1 |
Cutter weight (kg) |
1.15 |
|
2 |
Battery weight (kg) |
1.7 |
|
3 |
Total gross weight(kg) |
3.7 |
|
4 |
Battery type |
24V,12AH,Lithium battery |
|
5 |
Power(watt) |
100 |
|
6 |
Blade Rotating speed(r/min) |
1500 |
|
7 |
Length of the blade(cm) |
26 |
|
9 |
Motor type |
Brushless motor |
|
10 |
Effective plucking width(cm) |
26 |
|
11 |
Tea plucking yield rate |
≥95% |
|
12 |
Tea collecting tray size(L*W*H) mm |
270*110*80 |
|
13 |
Machine dimension(L*W*H) mm |
380*145*156 |
|
14 |
Packaging box size (mm) of 1 machine |
385*160*170 |
|
15 |
usage time after full charging |
6-8h |
|
16 |
Charging time |
4-5h |
